- Bạn vui lòng tham khảo Thỏa Thuận Sử Dụng của Thư Viện Số
Tài liệu Thư viện số
Danh mục TaiLieu.VN
Học phần cung cấp cho sinh viên nắm bắt các kiến thức cơ bản về nhiệt, nội dung hai định luật nhiệt động một và hai, đặc điểm, tính chất và sự biến đổi năng lượng của các quá trình nhiệt động, sự chuyển biến năng lượng từ nhiệt sang công trong các chu trình thuận chiều và chu trình ngược chiều, cũng như đặc tính nhiệt của các môi chất...
1 p hcmute 08/04/2020 447 13
In this century, energy saving and environmental protection are the most interesting topics in scientific technology field. One of them is heat exchangers topic. Thus, nowadays, the conventional heat exchangers have been quickly replaced by microchannels heat sinks which giving smaller size and better heat transfer behaviors. Therefore, here are much researches focus on microchannels heat sinks, especially in boiling process, as present below.
6 p hcmute 24/03/2020 318 1
Từ khóa: Heat transfer, boiling, evaporation, pure water, distilled water, microchannel.
Đề cương chi tiết môn học Thiết bị trao đổi nhiệt (Heat exchangers) - Công nghệ Kỹ thuật Nhiệt
Môn học này trang bị cho người học những kiến thức cơ bản về nguyên lý làm việc, cấu tạo và phương pháp tính toán các thiết bị trao đổi nhiệt đặc trưng. Đây là học phần chuyên sâu về truyền nhiệt, giúp người học có thể tính toán thiết kế và kiểm tra các thiết bị trao đổi nhiệt và áp dụng vào thực tế sản xuất.
19 p hcmute 05/03/2020 477 6
Từ khóa: Đề cương chi tiết môn học Thiết bị trao đổi nhiệt; Heat exchangers; Công nghệ Kỹ thuật Nhiệt
Đề cương chi tiết môn học Truyền nhiệt (Heat transfer) - Công nghệ Kỹ thuật Nhiệt
Môn học này trang bị cho người học những kiến thức cơ bản về truyền nhiệt (dẫn nhiệt, đối lưu và bức xạ). Đây là học phần cơ sở của chuyên ngành, nó cung cấp cho người học các phương pháp tính toán để có thể giải quyết bài toán liên quan đến truyền nhiệt cho các môn chuyên ngành.
19 p hcmute 04/03/2020 559 3
Từ khóa: Đề cương chi tiết môn học Truyền nhiệt; Heat transfer; Công nghệ Kỹ thuật Nhiệt
The heat transfer characteristics of a microtube evaporator use refrigerant R134a were studied experimentally. This evaporator was made from copper tubes and aluminum foils with overall dimensions (L*W*H) of 259.3*43*200mm. The evaporator has 10 passes, each pass including 8 copper pipes (with hydraulic diameter of 0.82mm) and 83 aluminum foils (with the thickness of 0.3 mm); the distance between the two foils is 2.6 mm. The experiment was...
6 p hcmute 09/01/2020 314 2
Từ khóa: Experimental Study, Heat Transfer, R134a, MultiMicro Tubes, Evaporator.
Study on microstructure and properties of Cu-9Ni-6Sn alloy applied for electric measurement
High strength elastic alloy has an important role in the manufacture of electrical equipment and machine building. The design trend is reduced in size but still assure the equipment quality is growing significantly and the corporation to manufacture equipment is researched thoroughly.
7 p hcmute 07/06/2019 314 1
Từ khóa: electric measurement, spinodal decompositon, heat treatment process
The heat transfer characteristics of a microtube evaporator use refrigerant R134a were studied experimentally. This evaporator was made from copper tubes and aluminum foils with overall dimensions (L*W*H) of 259.3*43*200mm. The evaporator has 10 passes, each pass including 8 copper pipes (with hydraulic diameter of 0.82mm) and 83 aluminum foils (with the thickness of 0.3 mm); the distance between the two foils is 2.6 mm
8 p hcmute 23/05/2019 344 2
Từ khóa: Experimental Study, Heat Transfer, R134a, MultiMicro Tubes, Evaporator.
Experimental study on the pressure and the power input of a CO air conditioning system
The environmentally friendly refrigerants and high effectiveness heat exchangers are interesting topics for scientists. For natural refrigerants, the carbon dioxide (R744-CO ) is considered as a good candidate in order to replace HCFC (Hydrochlofluorocarbon) or HFC (Hydrofluorocarbon). Besides, the compact heat exchangers with high heat transfer efficiency would be used widely in the future
12 p hcmute 23/05/2019 382 2
Từ khóa: Air conditioning, CO2 refrigerant, pressure, power input, evaporator, heat transfer
In the field of dynamic mold temperature control for injection molding, the heating coil is one of the fasted methods for heating the mold surface. This method had got more attention from researcher. In the field of plastic manufacturing, as products become thinner and smaller, it is difficult to manufacture them using conventional injection molding (CIM), because heat transfers rapidly from the melt to mold wall due to part’s...
6 p hcmute 09/05/2019 346 1
Từ khóa: Study on Melt Flow Length in Injection Molding Process with Induction Coil Heating for Mold Temperature Control, Pham Son Minh, Nguyen Thanh Hon, Nguyen Hoang Quan, Cao Văn Minh Tu, Tran Van Truong
Numerical Study on The Air Heating for Injection Mold
Injection molding is a popular technology for manufacturing. However, as parts become thinner and maller, they become difficult to manufacture using conventional injection molding, because heat transfers rapidlyom the melt to mold wall due to the thinness of the parts. Increasing the mold temperature, melt temperature, oracking pressure increases the cycle time. At higher mold surface temperatures, the surface quality of the part will improve...
7 p hcmute 09/05/2019 276 2
Từ khóa: Numerical Study on The Air Heating for Injection Mold, Phạm Son Minh, Phan The Nhan, and Luong Minh Tu
Experiment Investigation on a Solar Asisted Heat Pump Dryer for Chili
The aim of this research is to evaluate the performance of solar assisted heat pump dryer for chilli. The experiments were carried out on three types different of days such as clear day, intermittent cloud sky day and overcast sky day. The experimental results show that the useful heat gain of solar collectors for drying chili of the clear day, intermittent cloud sky day and overcast sky day are 14.5 kWh; 8.91 kWh and 0 kWh, respectively,...
10 p hcmute 23/04/2019 393 2
Từ khóa: Drying, Flat Plate Collector, Heat Pump, Solar Radiation, The Useful Heat Gain, Coefficient of Performance
An Experiment on a CO Air Conditioning System with Copper Heat Exchangers 2
This paper presented an experiment on a CO air conditioning system with copper heat exchangers. In this study, the compressor and cooler were tested with hydraulic method to determine the deformed and torn temperatures. The results show that conventional compressor is not suitable for using high pressure, due to the COP of cycle is very low (0.5 only). With CO2 compressor, the cycle can achieved COP of 3.07 at the evaporative temperature of...
7 p hcmute 01/06/2018 508 2
Từ khóa: air conditioning system, heat exchanger, cooler, evaporator, CO refrigerant. 2
Bộ sưu tập nổi bật