Blade design and numerical testing of a small wind turbine in low wind speed conditions
The largest problems for small wind turbines, operating at low wind speed includes the unstable wind conditions and the generation of laminar flow separation and laminar separation bubbles on the wind turbine blades due to the low Reynolds ( Re ) number. Thus, the power coefficient ( Cp ) of small wind turbines is lower than the Cp of large wind turbines. Using and comparing among four airfoils, consisting of SD7062, SG6043, S809 and E387, which are suitable to the working conditions of small wind turbines, four wind turbine blades were designed to achieve gigher effciency at a low wind speed range of 3-7 m/s
Xin lỗi bạn không thể down load tài liệu này. Bạn có thể xem tài liệu trực tuyến trên website hoặc liên hệ thư viện trường để được hướng dẫn. Cảm ơn bạn đã sử dụng dịch vụ của chúng tôi.
Bạn vui lòng tham khảo thỏa thuận sử dụng của thư viện số.